MT6753_EMMC_Posh_L530_5_1_ALPS_L1_MP3_V2_47_GINR6753_65U_L1

posh l530 firmware

MT6753_EMMC_Posh_L530_5_1_ALPS_L1_MP3_V2_47_GINR6753_65U_L1(2018_08_29_16_20)

 Reinsert phone battery. 

 Battery must be charged.

 Phone must be off with battery inside. 

 Please insert USB cable now...

 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)

 Boot mode: Preloader

 Using Algo 2.

 Phone detected...Please wait

 Sending DA agent, please wait...

 ----------------------------------------------------

 BaseBand CPU :MT6753

 BaseBand CPU Secure Version : FF

 BaseBand CPU Bootloader Version : 01

 ----------------------------------------------------

 INT RAM: 128 KB SDRAM

 EXT RAM: 2 GB  DRAM

 ----------------------------------------------------

 EMMC: (116Gb+16384Mb) SAMSUNG 0x513832334d42 

 EMMC FW VERSION: 00:00:00:00:00:00:00:00

 EMMC CID: 150100513832334D42 : 00000000000000

 EMMC UA SIZE: 0x3a3e00000     

 BOOT STYLE: EMMC BOOT

 FULL LENGTH: 0x3a4a00000      [14.572 GB]

 Status: USB_HIGH_SPEED

 Detecting high speed port, wait......

 If driver not installed, install high speed port driver.

 If not need high speed port, disable it.

 After repeat opperation.

 Detected : MediaTek DA USB VCOM (Android) (COM148)

 -Reading GPT Drive OK

 Build ID: LMY47D

 Display ID: POSH_L530_V03_20160330

 Version: 5.1

 Build Date: Sat Apr  2 20:39:10 CST 2016

 Brand: Posh

 Model: L530

 Device: L530

 Manufacturer: Posh

 Region: US

 Mediatek Version Release: ALPS.L1.MP3.V2.47_GINR6753.65U.L1

 Dumping Preloader.

 Start dumping flash, this can take up to 1 hour.......

 Start processing proinfo

 Reading:  BEGIN: 0x80000          - LEN: 0x300000        

 Start processing nvram

 IMEI[1] from NVRAM: 358953070065964

 IMEI[2] from NVRAM: 358953070148463

 Start processing protect1 ......

 Reading:  BEGIN: 0x880000         - LEN: 0xa00000        

 Start processing protect2 ......

 Reading:  BEGIN: 0x1280000        - LEN: 0xa00000        

 Start processing lk ......

 Start processing boot 

 Start processing recovery 

 Start processing logo ......

 Start processing secro

 Reading:  BEGIN: 0x5200000        - LEN: 0x600000        

 Start processing trustzone

 Start processing frp ......

 Reading:  BEGIN: 0x6a00000        - LEN: 0x100000        

 Start processing nvdata ......

 Reading:  BEGIN: 0x6b00000        - LEN: 0x2000000       

 Start processing system

 Reading:  BEGIN: 0xb000000        - LEN: 0xa0000000      

 Saved to : C:\Users\my computer\Documents\Android_MTK\firmware_backup\MT6753_EMMC_Posh_L530_5_1_ALPS_L1_MP3_V2_47_GINR6753_65U_L1(2018_08_29_16_20)

 Wait untill phone will start charging.

 All done.

rs 300 only 

skype id = fileforsale@gmail.com

for pass contact skype call / whatsapp

0323-8236268

MT6735__Posh__L530__L530__5.1__ALPS.L1.MP3.V2.47_GINR6753.65U.L1

posh L530 flash file

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 30 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6735

BB_CPU_NME : [MediaTek] MT6735_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x93

NAND Flash : NOT INSTALLED

eMMC Flash : 510001154D3332384B320042C3924BEE

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM328

[eMMC] : FLASH_CID : 150100513832334D4200324BEE4BB2C3

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0xEE6AE9A28095841F55CEE8CFB960C979

INT RAM    : 0x00020000

EXT RAM    : 0x80000000 [2 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : Posh

ProdName  : L530

ProdModel : L530

Device    : L530

AndroidVer: 5.1

MTKxCPU   : MT6735

MTKxPRJ   : ALPS.L1.MP3.V2.47_GINR6753.65U.L1

[Read Ok] : preloader_d260_pmb.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : tz1.img

[Read Ok] : tz2.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6753 / V1.1.2 / d260_pmb / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 2060 MiB

Scatter saved to : D:\posh\posh l530\MT6735__Posh__L530__L530__5.1__ALPS.L1.MP3.V2.47_GINR6753.65U.L1\

All done!

Done!

Elapsed: 00:06:48

Reconnect Power/Cable!

rs - 300 only 

skype id = fileforsale@gmail.com 

for pass call / whatsapp 

0323-8236268

MT6592_EMMC_E550_E550_4_4_2_ALPS_KK1_MP1_V2_11

posh titan pro hd e550 flash file

 Reinsert phone battery. 

 Battery must be charged.

 Phone must be off with battery inside. 

 Please insert USB cable now...

 Detected : MediaTek PreLoader USB VCOM (Android) (COM32)

 Boot mode: Preloader

 Using Algo 1.

 Phone detected...Please wait

 Sending DA agent, please wait...

 ----------------------------------------------------

 BaseBand CPU :MT6592

 BaseBand CPU Secure Version : FF

 BaseBand CPU Bootloader Version : 01

 ----------------------------------------------------

 INT RAM: 128 KB SDRAM

 EXT RAM: 1 GB  DRAM

 ----------------------------------------------------

 EMMC: (58Gb+8192Mb) SAMSUNG 0x513732534d42 

 EMMC FW VERSION: 00:00:00:00:00:00:00:00

 EMMC CID: 150100513732534D42 : 00000000000000

 EMMC UA SIZE: 0x1d2000000     

 BOOT STYLE: EMMC BOOT

 FULL LENGTH: 0x1d2880000      [7.290 GB]

 Status: USB_HIGH_SPEED

 Detecting high speed port, wait......

 If driver not installed, install high speed port driver.

 If not need high speed port, disable it.

 After repeat opperation.

 Detected : MediaTek DA USB VCOM (Android) (COM92)

 Build ID: KOT49H

 Display ID: POSH_E550_V08_151214

 Version: 4.4.2

 Build Date: Mon Dec 14 11:50:00 CST 2015

 Model: E550

 Brand: E550

 Device: techain92_wet_kk

 Manufacturer: E550

 Region: US

 Region: US

 Mediatek Version Release: ALPS.KK1.MP1.V2.11

 Dumping Preloader.

 Start dumping flash, this can take up to 1 hour.......

 Start processing PRELOADER ......

 Reading:  BEGIN: 0x0              - LEN: 0x40000         

 Start processing MBR

 Reading:  BEGIN: 0x0              - LEN: 0x200           

 Start processing EBR1

 Reading:  BEGIN: 0x80000          - LEN: 0x200           

 Start processing proinfo

 Reading:  BEGIN: 0x100000         - LEN: 0x300000        

 Start processing nvram

 IMEI[1] from NVRAM: 355944070096276

 IMEI[2] from NVRAM: 355944070196522

 Start processing PROTECT_F

 Reading:  BEGIN: 0x900000         - LEN: 0xa00000        

 Start processing PROTECT_S

 Reading:  BEGIN: 0x1300000        - LEN: 0xa00000        

 Start processing UBOOT ......

 Start processing BOOTIMG 

 Start processing RECOVERY 

 Start processing secro

 Reading:  BEGIN: 0x31a0000        - LEN: 0x600000        

 Start processing LOGO ......

 Start processing system

 Reading:  BEGIN: 0x5000000        - LEN: 0x4b000000      

 Saved to : C:\Users\my computer\Documents\Android_MTK\firmware_backup\MT6592_EMMC_E550_E550_4_4_2_ALPS_KK1_MP1_V2_11(2018_08_28_20_59)

 Wait untill phone will start charging.

 All done.

rs 400 only  

skype id fileforsale@gmail.com

whatsapp - 03238236268

MT6592__E550__E550__techain92_wet_kk__4.4.2__ALPS.KK1.MP1.V2.11

posh e550 flash file

posh titan pro hd mobile firmware logs 

Wait for phone...

Phone found! [ 32 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6592

BB_CPU_NME : [MediaTek] MT6592_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x8A

NAND Flash : NOT INSTALLED

eMMC Flash : 150100513732534D42006B6A9ADD92A1

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BMS27

[eMMC] : FLASH_CID : 150100513732534D42006B6A9ADD92A1

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000

[eMMC] : FLASH_LEN : 0x00000001D2000000

[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]

DEV RID    : 0xEE6AE9A2C070BEAEF8E1AFB9E4D2BFAE

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

Brand     : E550

ProdName  : E550

ProdModel : E550

Device    : techain92_wet_kk

AndroidVer: 4.4.2

MTKxCPU   : MT6592

MTKxPRJ   : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_techain92_wet_kk.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6592 / V1.1.2 / techain92_wet_kk / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 1269 MiB

Scatter saved to : D:\posh\MT6592__E550__E550__techain92_wet_kk__4.4.2__ALPS.KK1.MP1.V2.11\

All done!

Done!

Elapsed: 00:05:37

Reconnect Power/Cable!

rs 400 only 

skype id  =  fileforsale@gmail.com

call  / whatsapp   =  0323-8236268

MT6735__PHICOMM__PHICOMM_CLUE_2S__PHICOMM_C6051__6.0__alps-mp-m0.mp1-V2.39.1_wtk6735m.35u.m0

phicomm c6051 flash file

Wait for phone...

Phone found! [ 32 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6735

BB_CPU_NME : [MediaTek] MT6735_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x93

NAND Flash : NOT INSTALLED

eMMC Flash : 484A0190613447388152A43229430EB5

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x90 , OEM : 014A

[eMMC] : FLASH_INF : [HYNIX] , 2a4G8

[eMMC] : FLASH_CID : 90014A483847346132A45281B50EC329

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000001D2000000

[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]

DEV RID    : 0xEE6AE9A2CA967B01AD23E591DF1E6363

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : PHICOMM

ProdName  : PHICOMM_C6051

ProdModel : PHICOMM CLUE 2S

Device    : PHICOMM_C6051

AndroidVer: 6.0

MTKxCPU   : MT6735

MTKxPRJ   : alps-mp-m0.mp1-V2.39.1_wtk6735m.35u.m0

[Read Ok] : preloader_x2605b_phicomm_india_35m35u.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : tz1.img

[Read Ok] : tz2.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / x2605b_phicomm_india_35m35u / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 2696 MiB

Scatter saved to : C:\Users\my computer\Desktop\MT6735__PHICOMM__PHICOMM_CLUE_2S__PHICOMM_C6051__6.0__alps-mp-m0.mp1-V2.39.1_wtk6735m.35u.m0\

All done!

Done!

Elapsed: 00:07:14

Reconnect Power/Cable!

rs 300 only 

for psw contact skype or call / whatsapp

skype - fileforsale@gmail.com

call = 0323-8236268

MT6580__alps__Note_8__dwzn__5.1__V06-V1.0-SHX-S20-FWVGA-EMMC-B1B5-XBQ-EN-V18

note 8 flash file

Wait for phone...

Phone found! [ 32 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 11010030303447453001A09101BB8123

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x11 , OEM : 0100

[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40

[eMMC] : FLASH_CID : 11010030303447453001A09101BB8123

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000

[eMMC] : FLASH_LEN : 0x00000000EC000000

[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]

DEV RID    : 0xEE6AE9A222ACDF0E11109F2EA8E25743

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : alps

ProdName  : full_dwzn

ProdModel : Note 8

Device    : dwzn

AndroidVer: 5.1

MTKxCPU   : MT6580

MTKxPRJ   : V06-V1.0-SHX-S20-FWVGA-EMMC-B1B5-XBQ-EN-V18

[Read Ok] : preloader_dwzn.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / dwzn / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 1331 MiB

Scatter saved to : G:\MT6580__alps__Note_8__dwzn__5.1__V06-V1.0-SHX-S20-FWVGA-EMMC-B1B5-XBQ-EN-V18\

All done!

Done!

Elapsed: 00:12:22

Reconnect Power/Cable!

rs 350 only 

for pass contact skype /call or whatsapp

skype id =  fileforsale@gmail.com

call / whatsapp=   0323-8236268

MT6572_EMMC_alps__M7506__4_2_2__ALPS_JB3_MP_V1_12

microdigit m7506 firmware

 Please insert USB cable now...

 Detected : MediaTek PreLoader USB VCOM (Android) (COM30)

 Boot mode: Preloader

 Using Algo 1.

 Phone detected...Please wait

 Sending DA agent, please wait...

 ----------------------------------------------------

 BaseBand CPU :MT6572

 BaseBand CPU Secure Version : FF

 BaseBand CPU Bootloader Version : 01

 ----------------------------------------------------

 INT RAM: 128 KB SDRAM

 EXT RAM: 512 MB  DRAM

 ----------------------------------------------------

 EMMC: (28Gb+4096Mb) HYNIX 0x484147326504 

 EMMC FW VERSION: 86:00:00:00:00:00:00:00

 EMMC CID: 90014A484147326504 : 00000000000000

 EMMC UA SIZE: 0xe7000000      

 BOOT STYLE: EMMC BOOT

 FULL LENGTH: 0xe7600000       [3.615 GB]

 Status: USB_HIGH_SPEED

 Detecting high speed port, wait......

 If driver not installed, install high speed port driver.

 If not need high speed port, disable it.

 After repeat opperation.

 Detected : MediaTek DA USB VCOM (Android) (COM148)

 Build ID: JDQ39 Display ID: M7506 3G.JB3.MP.V1.12 Version: 4.2.2 Build Date: Wed Apr  8 10:54:12 CST 2015 Model: M7506 Brand: alps Device: m72_emmc_s6_pcb22_1024_bisaifen_ddr1 Manufacturer: alps Region: US Mediatek Version Release: ALPS.JB3.MP.V1.12 Dumping Preloader.

 Start dumping flash, this can take up to 1 hour.......

 Start processing PRELOADER ......

 Reading:  BEGIN: 0x0              - LEN: 0x600000        

 Start processing MBR

 Reading:  BEGIN: 0x600000         - LEN: 0x200           

 Start processing EBR1

 Reading:  BEGIN: 0x680000         - LEN: 0x200           

 Start processing proinfo

 Reading:  BEGIN: 0x700000         - LEN: 0x300000        

 Start processing nvram

 IMEI[1] from NVRAM: 359982635698189

 IMEI[2] from NVRAM: 359982635698190

 Start processing PROTECT_F

 Reading:  BEGIN: 0xf00000         - LEN: 0xa00000        

 Start processing PROTECT_S

 Reading:  BEGIN: 0x1900000        - LEN: 0xa00000        

 Start processing UBOOT ......

 Start processing BOOTIMG 

 Start processing RECOVERY 

 Start processing secro

 Reading:  BEGIN: 0x2f80000        - LEN: 0x40000         

 Start processing LOGO ......

 Start processing system

 Reading:  BEGIN: 0x3d40000        - LEN: 0x25800000      

 Saved to : C:\Users\my computer\Documents\Android_MTK\firmware_backup\MT6572_EMMC_alps__M7506__4_2_2__ALPS_JB3_MP_V1_12_(2018_08_02_22_38)

 Wait untill phone will start charging.

 All done.

rs 200 only 

for psw contact skype / call/ whatsapp

0323-8236268

skype id  =   fileforsale@gmail.com

MT6572__alps__M7506__m72_emmc_s6_pcb22_1024_bisaifen_ddr1__4.2.2__ALPS.JB3.MP.V1.12

microdigit m7506 flash file

MT6572__alps__M7506__m72_emmc_s6_pcb22_1024_bisaifen_ddr1__4.2.2__ALPS.JB3.MP.V1.12

Wait for phone...

Phone found! [ 30 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : NOT INSTALLED

eMMC Flash : 90014A484147326504860065BF067105

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x90 , OEM : 014A

[eMMC] : FLASH_INF : [HYNIX] , e2GA

[eMMC] : FLASH_CID : 90014A484147326504860065BF067105

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000

[eMMC] : FLASH_LEN : 0x00000000E7000000

[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]

DEV RID    : 0xEE6AE9A2F85718B15FD8115540D2144C

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

Brand     : alps

ProdName  : m72_emmc_s6_pcb22_1024_bisaifen_ddr1

ProdModel : M7506

Device    : m72_emmc_s6_pcb22_1024_bisaifen_ddr1

AndroidVer: 4.2.2

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.JB3.MP.V1.12

[Read Ok] : preloader_m72_emmc_s6_pcb22_1024_bisaifen_ddr1.bi

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / m72_emmc_s6_pcb22_1024_bisaifen_ddr / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 637 MiB

Scatter saved to : G:\MT6572__alps__M7506__m72_emmc_s6_pcb22_1024_bisaifen_ddr1__4.2.2__ALPS.JB3.MP.V1.12\

All done!

Done!

Elapsed: 00:04:57

Reconnect Power/Cable!

rs 200only 

for psw call skype or call / whatsapp

0323-8236268

skype id =  fileforsale@gmail.com